|
Excellent ESD properties; ideal for use where static is a problem
Extremely durable with heavy vinyl surface, conductive center
Easily grounded with the use of a common point ground cord
Easily maintained with Resque 2 Work Surface Cleaner
RTT: 10E7 - 10E8 ohms
Thickness: 0.125"
Includes one installed 10mm snap socket
Made in America
"The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
|
|