|
Excellent ESD properties; ideal for use where static is a problem
Extremely durable with heavy vinyl surface, conductive center
Easily grounded with the use of a common point ground cord
Easily maintained with Resque 2 Work Surface Cleaner
RTT: 10E7 - 10E8 ohms
Thickness: 0.125"
Made in America
"The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
|
|