|
Designates work area as lead-free
Excellent for use in assembly operations where matting may come in contact with hot soldering iron tips or solder splashes
Volume electrical properties protect static sensitive products
Static dissipative top layer with a conductive bottom of synthetic rubber
Smooth finish
Easily maintained with Resque 2 Work Surface Cleaner
Resistance Top to Top (RTT): 10E7 - 10E8 Ohms, per S20.20 STM S4.1
Resistance Top to Ground point (RTG): 10E6 - 10E8 Ohms, per S20.20 STM S4.1
Thickness: 0.060"
Lead-free RoHS compliant
"The most important functional consideration for worksurfaces is the RTG resistance from the top of the surface to the groundable point." ANSI/ESD S20.20 Table 1 recommends a requirement of less than 1 X 10^9 ohms. "If Charged Device Model damage is a concern then setting a lower resistance limit should be considered. Typically, 1 x1 0^6 ohms." "Durability factors that should be considered are hardness, abrasion resistance, tear resistance, etc. Worksurfaces may require special heat resistant materials. Light reflection may be an important ergonomic consideration." (Ref: TR 20.20 section 5.3.1).
|
|